Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In with Google

In this Discussion

Lube applicator help
  • so i just got my lube applicator and my question is how can i load it with lube so that i dont waste any without sucking it up with the tip??? i filled the back side of the plunger but it doesnt work cause you got some of your lube stuck in the tip still. what do you guys do
  • what lube are you using? can you just apply more pressure to unstick it?
  • Badger
    Posts: 648
    If you have a pumper, remove the plunger from your applicator. Put your finger and thumb around the gaps in the pumper nozzle and back side of the applicator, and pump it 2~4X, or until the lube is about a 1/2 inch from the tip of the applicator. Work the excess lube into the open end and reinsert the plunger. Now you are ready to go.

    Oh, and after each application, use 1-2 squares of T.P. to wipe clean the outside of the applicator before refilling again or washing.
  • GeogioGeogio
    Posts: 107
    I put the lube in a small cup (I use a small stainless steel measuring cup) and then use the applicator to draw the lubricant into the syringe. DO NOT put the applicator or tip directly into the bottle, this will foster a crossfield contamination which would later result in you injecting mulitiplied bacteria field up into your canal, you don't want to do that, it is unhealthy.