Announcement

Collapse
No announcement yet.

Experienced Aneros user I designed my own!

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Experienced Aneros user I designed my own!

    Hey guys, I am an experienced aneros user and I absolutely love the products I have a progasm and a helix. They both didn't quite hit the spot though and found myself modding the tabs with a heat gun to change the insertable length. I decided to design my own! I am thinking of launching on kickstarter let me know what you think? www.lingaman.com

  • #2
    The Aneros lawyers might have some objections if you infringe on their patents!

    Comment


    • #3
      Looks promising, but have to agree with imp you are going to have some trouble!

      Comment


      • #4
        what a great idea! ib be a buyer - but don't know what the patents are. there are very similar toys to aneros out there, so not sure what has to be different or can't be the same.

        Comment


        • #5
          The patents were filed by Aneros in 1996 and they only last 20 years so there's freedom to operate now

          Comment


          • #6
            Very cool concept (adjustable). Will you manufacture these via 3d printing? Nice work!

            Comment


            • #7
              Thank you! The prototype on the website is 3D printed but for production they will be injection molded which allows the use of biocompatible materials. You can get biocompatible materials for 3D printing but they are extremely expensive!

              Comment


              • #8
                Originally posted by Lingaman View Post
                Thank you! The prototype on the website is 3D printed but for production they will be injection molded which allows the use of biocompatible materials. You can get biocompatible materials for 3D printing but they are extremely expensive!
                i would buy one! Would be able to ship to the uk when it's ready? When is it going into production?

                Comment


                • #9
                  I don't think it looks very comfortable with those slender rods prodding into the body. Can you make some different attachments? I personally would prefer something a bit more spherical and less pronounced.

                  Comment


                  • #10
                    Awesome! Yes of course, I can ship worldwide. The product will be launching on Kickstarter on the 21st March, if its successfully funded I estimate they will be ready in 8 weeks. If you subscribe on the website I will be sending out emails before launch so you can grab an early bird deal

                    Comment


                    • #11
                      Hi Pandabear the rods are the same diameter as the spherical balls on the perineum tab on the progasm. They are spherical at the ends and the prototype felt comfortable. The good thing with the screw design is it does allow different designs of attachments for future though

                      Comment


                      • #12
                        Im a little worried actually that because of the relative ignorance of prostate massagers in the wider sense, that it wont meet its kickstarter goal and get put in to production.

                        So my question is, if it doesnt meet its goal woudl you still consider making one when requested by those intereseted?

                        Comment


                        • #13
                          The_Fury I totally agree and it is a concern, unfortunately there is still a stigma attached to prostate massage. This is something I am hoping to change. If Kickstarter accept the project I am hoping it will go a step towards making it mainstream acceptable. The problem if it doesn't get funded is that tooling to make this part is very expensive 12,500 so I would have to sell a lot of prostate massagers at 38 each to break even. That's why I need to meet my funding goal!

                          Comment


                          • #14
                            Go ahead with it. One never knows where it may end up.

                            Comment


                            • #15
                              Originally posted by Lingaman View Post
                              The_Fury I totally agree and it is a concern, unfortunately there is still a stigma attached to prostate massage. This is something I am hoping to change. If Kickstarter accept the project I am hoping it will go a step towards making it mainstream acceptable. The problem if it doesn't get funded is that tooling to make this part is very expensive 12,500 so I would have to sell a lot of prostate massagers at 38 each to break even. That's why I need to meet my funding goal!
                              Lingaman Well what I mean is if it doesn't get funded, judging by the fact you have a prototype there would you be able to produce a further few like you already have? Even if it were at a greater cost?

                              im even happy to go one step further and if you wanted I would buy one now and I could even be a product tester for you, if it were to help in the form of testimonials. Might help to spread the positive word plus would be happy to share the Kickstarter with others via whatever means available.

                              Comment

                              Working...
                              X