How would you recommend smoothing out the seam on a Progasm ICE?
It's not there by much but it can be felt, I would prefer to not ruin the surface. And no power tools =P
Aneros
The Original Male G-Spot Stimulator
+ Reply to Thread
Results 1 to 3 of 3
-
LinkBack
LinkBack URL
About LinkBacks- Bookmark & Share
- Digg this Thread!
- Add Thread to del.icio.us
-
How to smooth out the Progasm ICE?
- Senior Member
My AnerosMe Profile
- Join Date
- Jan 2003
- Location
- Somewhere Over the Rainbow......a suburb of OZ ....(California)
- Posts
- 1,867
I would concur that this seam (the molding line) is very small, but if you feel the need to deal with it, you will have to do some progressive sanding. Start with a wet/dry sandpaper 320-400 grit to work the seam down and then switch to 1000 and 2000 grit sandpapers for smoothing. The latter two products are normally available for clear coat sanding for automotive finishes. This sanding can be done dry or with water. Why water? It keeps the paper from getting clogged up with particles of plastic. Be advised that you may not get the finish of the ICE back to the way that it looked prior to the sanding, i.e. it may look a little dull in the areas that you've sanded.
Good luck
BF Mayfield
-
No experience with the ICE but a bit of toothpaste on a soft cloth works on some clear plastics. Goggle for a 'jeweler's rouge cloth' -- also a winner for final finishing.
...be mindful of the present moment. It is special and has magical power.
Use it to perceive, to act, to change... from teachings of Jon Kabat-Zinn
-----
Opportunity is rarely recursive..always reach for the brass ring ! ...rook
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Register
Log In to participate in the open and friendly Aneros Community:
- Create posts and replies in the Aneros Forum
- Create entries in your own Aneros Blog
- Participate in Aneros Chat Events